Willkommen bei MattzoBricks › Foren › Switches › Switch Motor Housing
- Dieses Thema hat 7 Antworten und 5 Teilnehmer, und wurde zuletzt aktualisiert vor 2 Jahren, 3 Monaten von Zoltan.
-
AutorBeiträge
-
-
März 20, 2021 um 22:06 Uhr #2836MeinhardTeilnehmer
Hi,
I’m very impressed by all the work having been put into this project.
The two of us managed to built a working small setup so far. Thankyou for this great project!Having a few Danish switches and a few from BlueBrixx, we needed to get them automated too.
The motors sold by TrixBrix where out of stock for quite a while, so I’ve ordered a few micro servo motors from AZ-Delivery. The ones available at the time of ordering where the ones named MG90S.
We’ve managed to build a housing using quite a few bricks but we would like to hide the motors in a smaller housing.Not having 3D printed anything before nor having designed something to be 3D printed, I had a go and learnt to design something using FreeCad.
With the lack of a 3D printer, it’ll take a while before we get that printed but I thought I’d share the result anyway in the hope that some may find it useful.
Be aware, it’s work in progress.
The complete project can be found over at GitLab:
MG90S Micro Servo Motor Housing project on GitLab -
März 21, 2021 um 08:27 Uhr #2837ZoltanTeilnehmer
Nice work. Shall there be enough place for the servo arm to move in the closed housing?
Please share fotos from the thing if it is ready!
I glued a housing from polystyrol but I am not 100% satisfied with it. -
März 21, 2021 um 12:55 Uhr #2838MaxTeilnehmer
Very nice casing, thank you very much for sharing this!
-
März 21, 2021 um 13:06 Uhr #2839MeinhardTeilnehmer
I don’t know if you saw the other pictures over at GitLab. There is a sort of cross shaped pocket in the housing giving room for the motor’s arm.
I haven’tadded the gear plus arm to the modelbut might do itfor a clearer pictures of how the motor is supposed to live in it’s housing.
This may help in picturing how the motor’s arm is supposed to operate within the housing.
I certainly will share pictures once I manage to print this thing. Not having access to a 3D-Printer (yet?) I would rely on someone to make a test print. Let’s see, how soon this will happen. 😉- Diese Antwort wurde geändert vor 3 Jahren, 1 Monat von Meinhard. Grund: Updated the picture
-
März 21, 2021 um 13:51 Uhr #2841ZoltanTeilnehmer
Okay, thanks!
-
Juni 8, 2021 um 17:55 Uhr #3589Fabian SchwizgebelTeilnehmer
Hello everybody
I designed housings for the SG90 servos.1x Lego City switch 60238
1x Trixbrix switches
1x Lego double crossing 7996 -
Januar 13, 2022 um 17:49 Uhr #4751YevgenTeilnehmer
Hello All!
Here’s a take on a switch motor for MLC. Housing can be built around to your heart’s content.
Let me know what you think.
Thanks! -
Januar 13, 2022 um 20:16 Uhr #4752ZoltanTeilnehmer
Great. Absolutly professional gear. I would love to have some of these.
-
-
AutorBeiträge
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.