Joseph Bettenhausen

[Joseph Bettenhausen]

Hi,

I had the same scenario as you for the past couple of days. I had no problem with the ESP8266 and connecting reed sensors. However, with the same board https://www.amazon.de/gp/product/B071P98VTG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
and selection in the Arduino IDE, I could not get the MTCPU to stay connected to WiFi, the hub was no problem. It connected at first boot to WiFi and then connected to the hub, but then always lost connection to WiFi.
I also saw this error.
[WiFiClient.cpp:258] connect(): socket error on fd 55, errno: 113, “Software caused connection abort

Matthias had mentioned about WiFi frequencies here:

MTC4PU – MattzoTrainController for Powered Up

So I also tried naming my 2.4 and 5 SSID different, but that didn’t help either.

Have you tried the MTC4BT? I tried that last night with a status LED as well and got it working to controll my train with a lot less headache. It also now shows on my router, which the other MTCPU didn’t, because of the short connection. Every day I am more and more impressed with VS Code and glad the project is going in this direction.

• Diese Antwort wurde geändert vor 2 Jahren, 4 Monaten von Joseph Bettenhausen.
• Diese Antwort wurde geändert vor 2 Jahren, 4 Monaten von Joseph Bettenhausen. Grund: added error

[Autor]

Beiträge