Verfasste Forenbeiträge
-
Beiträge
-
Hey Matthias, thinks for the insights, I’ll order some new reedsensors and give them an other try in my new test setup. Could be I did something wrong there or had the wrong reedsensors.
As for the KY-003 hall sensors, I didn’t test one yet with the MLC software, before the posts above, but just now I did and they work without a changing the firmware! So that is cool.Nice thing is, they just fit in between the studs of the traintrack.
-
Diese Antwort wurde vor 3 Wochen von
-
Diese Antwort wurde vor 3 Wochen von
Oh and for all, the mqtt Explorer is a real handy tool for all that use mqtt!!!
I also use IoT mqtt panel on my phone. It allows you to send mqtt messages to that same broker, allowing you to (quick) test (different parts of) your setup.
-
Diese Antwort wurde vor 3 Wochen von
I read that part a few times, I must miss the part where the rocrail connection is show. I’ll give it a go tommorow and I’ll let you know!
Thanx anyway!
Oh and do you think it’s best to add a whole new type/class to all of the mlc software? Ofcourse based on the reed sensors part?
Well…a few years ago I already started with trying to automate, first BAP and then different versions of your work. Also tried reed sensors, but with different succes. Got a lot of missed reads on the sensors. Now I did a test with KY-003 hall sensors where I had 4 sensors set up and a train passed by all of them 200 times. Not a single one missed. So that is the way I want it to give it a go. Didn’t try a hall sensor yet with the mlc software and a esp8266, maybe I should do that first before thinking of expanding. Hahaha
Anyway, thanx for the goodwork in this great hobby!
Check….there I was looking how to get the ID…
Oh I use Mqtt Explorer on windows to see all mqtt messages to the mqtt broker, pretty nice!
Then I still seem to miss the section to connect/add the train in rocrail.
Do you think the DFR0626 could be used with an esp8266 for the hall sensors??
Thank you for the fast response.
Ahhh, sorry to hear that. The mega has so many ports that can be used without soldering something.
I do have a PCA9685 that works like a charm. Looking for a board like that (with a x number of 3 pins in a row) for my hall sensors then.
I think I disabled a few lines in the code, because at first they gave errors red (underlines) when I opened the files. And I thought I didn’t need them. Now I see they don’t give errors anymore (no more red underlines) No Idea how, but reabled the lines and all works like a charm!
Okay, started over again with brand new download and workspace, now it works! Also got it running in RocView!
Grrrr….downloaded new, but no run into other errors. Any change you can have a look with me?
-
Diese Antwort wurde vor 2 Jahren, 1 Monat von
-
Diese Antwort wurde vor 2 Jahren, 1 Monat von
-
Diese Antwort wurde vor 2 Jahren von
Check, maybe I’ll do a new download too.
If I then encouter the same problems as you did, maybe I can help you.
Do you know what you did to solve the first problem, because I have the exact same problem, MTC4BT is not scanning for Bluetooth items.
Wifi and broker are working.-
Diese Antwort wurde vor 2 Jahren, 1 Monat von
Rrrrrrrrr……ofcourse. Always quadruple check the board and use the right one! Now it seems so connect!!! On to the next station in my project!
Sadly not. I think I’m doing something wrong. Is there someone Who is willing to help me out and maybe take a look with Zoom or Teams?
-
Diese Antwort wurde vor 3 Wochen von