Forum Replies Created
-
AuthorPosts
-
Andrew HewittParticipant
that i have read twice. But Not understand how connect 4 siginals on one 3V3 . That you see also on diagram. The red wire on one pin
Andrew HewittParticipantI have further with that. When i have finishing my winter Village with leds and ballast than i shall on the easy try again my trains first to automation with rocrail.
If is that working than again my switches.
Now i use Sbrick and lego powered up hub for controle my trains and motorized switches with sbrick.
I let you know.
I appreciate that i have ask me this.
It is pitty that we are living far than it was easier face to face.
Maybe you can do some day live streams with questions from us members.Andrew HewittParticipantis there a tool so i can see what is place on my esp32. Monitoring with Visual Studio Code not working
Andrew HewittParticipantI have the same problems with the file that i must place in the correct folder
Andrew HewittParticipantCan i make this switch all in Visual Studio Code. In Arduino IDE i get a lot of errors. In Visual Studio i have make one esp32 working with one PU train
Andrew HewittParticipantI have read that but i not understand the platform.ini with a path.
Build flags that say not on that.
So that i was askingAndrew HewittParticipantOkay i shall that do. But it is mean path than with data_dir
Andrew HewittParticipantI must now create a path in platform.ini with data_dir
Now that we have prepared the folder that holds our controller configuration files, we can put the folder path in platformio.ini. One of the first settings in platformio.ini is called data_dir. This setting should point to the folder your put your controller configuration files in. If you followed the example above it’s value should be: $PROJECT_DIR/data/MTC4BT1
What means it and how i can do that than.Andrew HewittParticipantI have solved the errors. And my is dutch so treinen —- no locos. That is also good. I have upload this configuration with network and platform.ini in my esp32 and corrected upload.
When my son is finished playing with the trains here manual i shall tested it.
Thnx Hilbert for notice meAndrew HewittParticipantI have allready one solved
Andrew HewittParticipantAhh that is it i miss i think tinyxml2.cpp not in the corrected file. I let you know if it is work
Andrew HewittParticipantI have use that. And set. But i must copy the file to some directory
Andrew HewittParticipantHow do i do that to use Rocrail and Mosquitto on Linux. I have a chromebook with linux inside
Andrew HewittParticipantGood day. I have finaly working my laptop that he can see the esp8266. We are going to start with the switches and leds and sensors (all from trixbrix) My question is can i connect 1 one double cross switch (with 2 switches ) and 2 leds one sensor. And than 2 swichtes single with two leds and two sensors on one esp8266. In totaal i have 2 switches (single), 6 leds and 4 sensors. I want to know must i use one esp8266 (MLC) or two. thanx
Andrew HewittParticipantTo get them on and off and maybe dimm.
If it not can than i use my usb hub instantAndrew HewittParticipantQuestion again
Is it possible to connect usb leds to a esp32 in the future. I have a lot of streetlights usb on my layout.
I want this also control with a esp32 or esp8266.Let me know anyone
Andrew HewittParticipantThnx I very glad that i have a account on this forum
Andrew HewittParticipantQuestion esp32 and PU Controllers. I want use 1 esp32 to control two differents trains with PU.
Must i make first everything in Rocrail or NControle or can i this config before i have everything make in Rocrail -
AuthorPosts